2022.01.08
Precautions for foam machine in use:
1. Check whether the screws are loose and whether each spindle rotates flexibly.
2. Correctly install each motor and its circuit. The motor adopts three-phase 380V heater with 220V current.
3. Make good grounding protection for Xinji foam machinery manufacturers.
4. Check whether the rotation direction of each main shaft of the test machine is correct.
5, the heating plate is preheated to the barrel shell to melt the foam, and it is noted that the material in the upper and lower barrels must be completely melted before each extruder starts to operate, so that it can be used for rotating the large wheel flexibly. It is recommended to use blowtorch to preheat the upper and lower machine heads intensively because of the residual raw materials in the machine heads.
6. Flexible control of the length of the pumping strip into the water, depending on the temperature and water temperature, reduce the temperature of the pumping strip through water by about 1.1-1.7m, so that the pumping strip is not brittle and does not stick after cutting.
7. Observe the color and shape of foam machinery in Xinji, and grasp the power supply and shutdown situation of each heating plate flexibly.
8. For raw materials with more impurities such as ash and soil, 20 mesh-40 mesh and 1-3 layers of screen mesh can be added before the screen plate to ensure the color and purity of particles.
Tel:
English 
