2022.09.01
The cutting wheel of the EPS cutting machine is directly fixed on the shaft of the motor, and the sample fixed in the jaw of the cutting machine is cut by the swing of the saw frame.
When working, the motor of the cutting machine is fixed on the base, the shaft sleeve is sleeved on the shaft of the motor of the cutting machine, and the nut and the clip are used to fix the grinding wheel. Then the bracket fixed in front of the motor is equipped with a saw frame that can rotate around the horizontal axis, and the jaw is moved by the rotation of the handle to clamp the sample in the jaw seat. When the saw frame is rotated, the sample can be cut. The cooling system of the EPS cutting machine can manually control the flow with a knob fixed on the cock, and the coolant is drained by a rubber tube fixed on the back of the base. When the EPS cutting machine is working, the grinding wheel is blocked by the cover to prevent the coolant from splashing and the grinding wheel breaking and hurting people.
Tel:
English 
