2023.02.04
During the maintenance process, we must do a good job in safety protection and truly protect our own rights and interests. So how to do a good job in security?
EPS foam machinery, EPS foam machine, EPS foam molding machine
Check device operating status
When EPS equipment is overhauled, the operating status of the equipment and whether it needs to be overhauled should be determined. If the running equipment is very stable and there are no major problems, in fact, it only needs to do a basic power check and switch equipment, which can naturally guarantee a good use effect. In fact, this kind of EPS mechanical equipment has a self-inspection system, so we only need to do the basic inspection in daily life. Of course, we can restore the normal use of the equipment, which will not have much impact on our work. Just determine if the device is faulty and check it against the repair mode.
Must troubleshoot
If the EPS equipment is really faulty, which is very serious, then we should do a good job of basic troubleshooting. Make sure to disconnect the load and operate without affecting external equipment. The power supply and battery problems of the device should be considered first, and checked separately from the host computer, and then the subsequent detailed fault inspection should be carried out. As long as comprehensive troubleshooting and maintenance are completed, the equipment can be restored to normal use.
Tel:
English 
