Tel:
English 
Mould adjustable EPS Block Molding Machine introduction
It is easy to get different size EPS block through mold adjustable technology by fully automatic. Especially for the EPS sandwich panel industry, the different size EPS blocks can save lots of EPS foam waste. We have bottom wall movable, top wall movable and side wall movable for choice.
The EPS Block Molding Machine is to form the EPS raw material together into a big block that meets the various requirements. Moulding of EPS blocks may follow several sequences:
• Fill the EPS Block molding machine with expanded beads
• Heat the EPS Block mould by steam
• Cool the expandable polystyrene beads by air or EPS Vacuum cooling system.
• Eject the finished block from the mold cavity.
Cooling of the foam part via vacuum allows the foam to stiffen and reduce its internal pressure. Additional finishing operations, such as hot-wire cutting, printing, laminating, etc., can be used to customize for final applications.
EPS Block Conveyor system
The block conveyor system is controlled by touch screen & PLC, sensors and pneumatic, driven by motor and chains. Automatic drying system is available. It works between EPS Block Molding Machine and continuous cutting line to increase plant automation, to reduce labor work strength and shorten drying time. While one line is full, the system would stop to feed this line and automatically switch to feed another line. While one line is empty, the system would stop discharge this line and switch to discharge another line.
