Tel:
English 
It makes eps foam beads to big foam block through steam heating and air cooling. With PLC and touch screen to realize full automatic production for feeding, heating, vacuum cooling, mould opening, mould closing and ejecting the foam block.
– All block mould frame are treated by heat-treatment to release the welding stress, so that the frames would not deformed.
– After heating treatment, all mould frame are processed by sand blasting treatment to get rust prevention, so under coat and finishing coat are greatly improved anticorrosion performance and long life;
– Adopts PLC(Japan Mitsubishi) and touch screen (French Schneider) with easily operation;
– Equipped with material level sensor for control the filling, the block cooling is controlled by foam pressure sensor, it is realize the filling, heating, cooling and open block mould, the whole working procedure automatically.
1. Stainless steel inner plate
2. Foaming sensor is used to detect cooling time
3. The material level in fill silo is controlled by level sensor automatically.
4. Four units special injectors driven by hydraulic on top
5. Equipped with mould pressure and temperature sensor system
6. Germany Gemu or Taiwan WEV butterfly valves are used on steam pipe.
7. Condenser tank 2.5m3 with water spray and sieving units – individual vacuum tank 10m3, and two Nash vacuum
8. pumps made in China( 11kw for each) used on machine.
9. Automatic block ejection system, weighting system and tilter are optional.
