Tel:
English 
-
Press EPS block, block requirement is not crisp and not soft very much, if block is crisp, beads is easy to separate from block. Then you have to increase heating pressure. If too soft, then decrease heating pressure.
-
Every day , before working, please discharge condensate water in air holder and steam accumulator( keep water level suitable ) and check whether lubricate oil cup keep suitable level or not ;
-
Equipped with a movable template that can be raised and lowered, the lifting size can be adjusted arbitrarily, and it is accurate and stable for the production of foam boards of different heights.
-
Saving factory space to the greater extent
- The polystyrene automatic molding machine features compact dimensions and structure, streamlined and reasonable pipeline layout
- More machines can be placed in a limited space to increase production
- The filling level is controlled by level sensors automatically
- When there is no sufficient material available in the silo the unit stops the machine
- So that the styrofoam block machine always runs at high efficiency
- EPS block has many pores on surface and you can discern beads figure on surface.With these pores, the block could cool down more quickly and efficiency. In addition, inner steam is easy suck out, so that block need less time for cooling and deform seriously.
