2022.11.25
The working principle of the foam mechanical molding machine is similar to that of the syringe of the foam plastic pulverizer for injection. It uses the thrust of the screw to inject the plasticized molten plastic into the closed mold cavity, and obtains the finished product after curing and shaping. process. How to use the foam machinery molding machine Choose a flat table, put the machine firmly, you can pull the feet of the foam machinery molding machine apart to make the machine panel easy to observe, insert the plug on the hand-held sensor head into the socket on the panel and tighten it.
Locate the notch, insert one end of the plug of the power cord into the socket on the rear panel of the chassis, and the other end into the power supply socket. Please be sure to use single-phase three-wire power to turn on the “main power switch” on the rear panel of the foam machine molding machine, press the panel Press the “On/Off” key, and the machine can work when the green indicator light of “Ready” is on. The equipment should be wiped frequently, kept clean, no mud and water accumulation is allowed Machine, billet feeding machine and tile support conveyor line constitute the tile billet production line, which does not require manual operation at all. Compared with the ceramic tile automatic tile pressing mechanism, the structural principle of the foam mechanical forming machine is relatively simple. It is mainly composed of a hydraulic pump, a hydraulic slide plug, a fixed pressing table, a movable knocking table, and a tile pressing mold. , The foam mechanical molding machine also has the advantages of operation, maintenance, maintenance, mechanical debugging, and easy mold replacement.
Tel:
English 
