2022.05.16
Designers cut any two-dimensional products from extruded and expanded EPS (polystyrene) foam through eps line cutting machine, and use CAD software to cooperate with cutting machine application software, only need to input the required size and graphics into CAD, and generate Cutting machine graphics, do a good job in the compilation process, and then generate cutting machine code, which is directly converted to the CNC cutting machine for cutting use, which is very simple and convenient to operate.
The mortar used in the construction of EPS line equipment for exterior walls is divided into special bonding mortar and surface polymer anti-cracking mortar. When using a hand-held electric mixer for mixing, the mass ratio of the bonding mortar to be mixed (or manually stirred) is water: mortar = 1:5, stirring and stirring time ≥ 5 minutes, and water is added at the same time, the mixing needs to be sufficiently uniform , the consistency is moderate and has a certain viscosity.
After preparing the mortar, let the mortar sit for 5 minutes. At the same time, it needs to be stirred again before use. Then the prepared mortar needs to be used within 1 hour. According to the structure diagram, the positioning line installed on the EPS part is ejected.
Cut the EPS components according to the size to be installed in the drawing. The EPS components are the standard size, and the turning part should be cut at a 45-degree angle for splicing, and the seam width of the splicing should also be considered when cutting. eps line paste: eps line gluing machine uses good adhesive mortar, uses thin-layer full-adhesion method to paste the line, squeezes the adhesive mortar line to overflow from the surrounding, and the width of the glue joint does not exceed 3 mm. The glue seam should be hooked, completely grey glue seam, and keep the surface of the eps line clean.
The main exterior wall of the villa is decorated with beige paint EPS lines, the roof slope is slow, the red tiles, the eaves are deep, the eaves are supported, and the eaves lines enhance the overall sense of heaviness. The shape of the round arch window highlights the delicate feeling of the house.
Tel:
English 
