2023.05.12
The foam forming machine is a process of pulverizing the foam, plasticizing it, pulling it out and cutting it into granules. It is composed of a foam mechanical pulverizer, a foam mechanical granulator and a granulator. Equipment for recycling. The vertical layout of the machine is driven by a hydraulic system, controlled by a Taiwan computer and touch screen, with a high degree of automation and easy use. The machine moves smoothly, stops in time after power failure, has no inertia, and is ideal for mold closing flow seams.
The foam molding machine is equipped with an automatic feeding system, equipped with a high-pressure silo and an automatic feeding device, and 15 automatic feeding guns can feed materials at the same time. The guide rod of the machine is made of 45 alloy steel, which has been quenched and hardened by heat treatment, and processed by a thread grinder, with a smooth surface. ,long lasting. The foam mechanical forming machine system adopts multiple heating methods, adopts solid and moving mold balance valve system, and controls the instrument and control valve to complete the cycle, thus making the machine more steam-efficient. And it solves the factor of unstable product quality due to unstable steam source, which greatly improves the quality. The steam and cooling water valves adopt imported components, which are safe in operation and stable in performance. One person can operate 2-3 machines. Through the use of a turntable, generally used for profiling, it is also possible to cut bodies of revolution, including spheres.
Foam forming machine high-performance heating wire, this high-life alloy wire is composed of nickel, chromium, cobalt, molybdenum and titanium, the length can be extended, it can speed up the cutting speed and have a long service life Reason Analysis The starting speed of the equipment is not very fast, and the glue output is relatively small, which leads to excessive plasticization of the raw materials, and the particle material slips in the barrel, which makes the screw speed fluctuate, causes the extrusion pressure to fluctuate, and leads to temperature control imbalance. Before the start-up, all preparations should be made to minimize the waiting time during the start-up heating process, and the replacement of the template should be fast and neat. If the screw of the equipment used is cooled by oil cooling, it is related to the setting of the instrument in the mold temperature controller, the smoothness of the pipeline, and the quality of the oil. If the equipment is cooled by circulating water, scale and solenoid valve failure are the main factors.
Tel:
English 
