Precautions for EPS foam wire cutting equipment:
1. Before starting the machine, check whether there is air leakage in the pipeline of the machine. If there is air leakage, never start the machine.
2. Pay attention to the command and coordination of technicians when maintaining the CNC cutting machine.
3. Close all air valves before closing, and put residual air in the airway.
4. The working raw materials used by the cutting machine are flammable gases such as acetylene, propane and liquefied gas. Therefore, it is necessary to check whether the entire gas path is well sealed on time.
5. When adjusting the fire, the operator should control the fire in time to avoid fire.
6. The gas source department of the cutting machine should completely extinguish the open flame, and place functional carbon dioxide or other corresponding fire extinguishing equipment around it.
7. In case of emergency during operation, press the red emergency stop switch immediately to avoid accidents. The utility model can cut hard foam, soft foam and plastic into square, rectangular, strip and the like, and has high cutting efficiency, accurate cutting size and high accuracy.
Multifunctional computer numerical control foam cutting machine, which can realize EPS (XPS) flat cutting, vertical cutting, special-shaped board cutting, and broken board respectively, and can cut various shapes of grooves on one device, such as large dovetail grooves , trapezoidal groove, rectangular groove, arc groove, corrugated groove, small package, model-free, European-style decorative parts, etc., and can easily operate CNC foam cutting equipment with high precision and reduce waste of polystyrene boards.