2023.06.27
1. Packaging materials
EPS is a thermoplastic material composed of about 98% air and 2% polystyrene. As the density can be as low as 10-30kg/m3, EPS is currently a very light packaging material. Under high loads, this material bends. When it is shaken or dropped on the ground, EPS foam products will play a role in cushioning and shockproof. Suitable for fragile products, mechanical parts, electrical appliances, electronics, auto parts and other industries
2. Building materials for exterior wall insulation
EPS buffer material can also be made into EPS insulation board, which is conducive to maintaining room temperature. The reason for choosing external wall insulation is that the heat storage of the wall can make the interior of the wall have a larger layout layer, which is conducive to the stability of the room temperature. When EPS foam is used in the external thermal insulation system, the apparent density must meet the standard requirements of JG149-2003 “External Thermal Insulation System of Exterior Wall with Thin Plastered Foamed Polystyrene Board”, that is, the apparent density is 18-22kg/m3.
At the same time, the main layout of the building can be maintained and the service life of the building can be extended. Since the external insulation layer is placed on the outside of the layout, the deformation stress of the layout caused by temperature changes is reduced, and the corrosion of the layout by harmful substances in the air and ultraviolet rays is reduced.
3. EPS wall material
The polystyrene mold cavity (EPS mold cavity) concrete wall has the advantages of structural integration, thermal insulation, and simple construction.
(1) Eliminate outdated production techniques and realize modularization, factoryization and large-scale production.
(2) The unique interface ensures the accuracy of module installation and combination.
(3) The unique cavity structure combination connection method ensures the accuracy of the composite wall section size.
(4) Modular design and manufacture of cast-in-place concrete shear wall formwork, integrated wall structure.
(5) The unique node structure and the closed “cold bridge” at the bottom realize the overall closure of the outer insulation layer and ensure that the overall energy saving of the building meets the design standard. .
(6) The unique dovetail groove design on the surface of the module allows decorative tiles to be pasted on the exterior wall.
(7) Improve the durability of the building so that the life of the insulation layer is consistent with the life of the structural wall.
Hollow polystyrene module (referred to as EPS module) concrete wall is suitable for fire-resistant grades of three (B1) and below, seismic fortification intensity of eight and below, building height of 15m and below, and building floors of 3 floors and above For the exterior walls of industrial and civil buildings below, the building height shall not exceed 5.1m, without supporting walls. The design and construction acceptance conform to JGJ/T 420-2017 “Technical Specifications for Application of Polystyrene Module Thermal Insulation Wall”.
This product can be widely used in urban and rural villa areas, such as ecologically livable, relocation, poverty alleviation, post-disaster reconstruction, beautiful villages, characteristic towns and other buildings.
4. Decorative line
EPS decorative line is a new type of external wall decorative line and component, which is suitable for EPS and XPS external wall insulation. It can not only reflect the European classical and elegant decoration style, but also ensure that the outer wall of the main building will not produce cold bridge effect. Especially for European-style high-rise buildings, the installation of cement components is difficult, the construction period is long, cracks will appear after a long time, and the durability is poor. EPS decorative line has the advantages of convenient installation, economy and durability. The expanded polystyrene decorative line is mainly made of demoulding B2 fireproof polystyrene, pasted with alkali-resistant glass fiber mesh, and equipped with a special adhesive outer protective layer. Not affected by temperature changes, cold resistance, heat resistance; not affected by humid climate and acid rain.
EPS decorative thread is fireproof and does not emit toxic substances. It is an environmentally friendly and high-quality decorative building material product. The EPS decorative line is cut by computer numerical control, and the production speed is fast. There are various models such as lines, Roman columns, window covers, bucket arches, etc., which can be installed around windows, door eaves, and walls to make the facade of the building more beautiful. Compared with traditional EPS, graphene EPS has higher strength ≥ 0.3MPa, low thermal conductivity ≤ 0.030w/m.k, and reaches B1 level fire resistance. Its series of products fully meet the requirements of low-energy buildings that the country is vigorously developing, and have been applied and demonstrated in prefabricated low-energy buildings.
Tel:
English 
