2022.06.07
EPS cut corners:
Generally speaking, our basic requirement for EPS wire cutting angle is that the cutting angle must reach 45 degrees. If the cut angle is less than 45 degrees, it may be 43 degrees or less. Such an angle may appear as 86 or 88 degrees, which is not a right angle of 90 degrees for physical conditions. At this point, we can only re-cut the angle, and the perfect 44.7 degree angle can meet the standard.
In the past, when cutting corners during installation, they were all cut according to the experience and feeling of the installer, so there would inevitably be errors in corner cutting. With the EPS line cutting angle locator, anyone can cut a standard 45-degree EPS line. Its successful development reduces a lot of work for the master and ensures the accuracy of EPS line cutting.
EPS wire cutting machine has the following advantages:
Just step on the foot switch, the machine will automatically press the material and automatically saw the material, which is both safe and convenient.
The gas-push oil feed saw, the sawing speed is stable, and the atomized cutting oil is automatically sprayed during sawing to achieve the effect of cooling and lubrication, ensuring that the sawtooth does not accumulate chips, and the saw blade is sharp and durable.
Cylinders are used to clamp the material firmly, not easily deformed, the sawing angle is accurate, and the pressing pressure can be adjusted, so that the hollow material is not easily deformed.
The discharge racks are 2 × 2 meters each, placed at the left and right ends of the machine. The discharge racks are equipped with positioning baffles for sawing to a fixed size (the conveying table is an iron plate platform).
The structure is stable, the triangular gantry is more stable and firm, and can withstand greater tension.
Tel:
English 
