Tel: +86-18868710888 571-81110023
ricky@epsole.com
Home
Product
Video
About us
Contact us
November
Insulation material: hot water pipe, storage room insulation, air conditioner insulation pipe, cooler insulation material
Close the feeding gate (at this time, the raw materials can be filled again). The raw materials in the machine will be released in advance gradually until the overflow source flows out of the pre sent beads. Open the raw material inlet to feed continuously, and at the same time, the overflow port continuously flows out the pre sent beads. At this time, it is necessary to adjust the valve and increase the temperature to obtain the best temperature.
At present, the laser is mainly used for cutting. Since the fine cutting of the laser beam is not easy to be deformed, the incision is smooth, and the edge is not ambiguous, it is currently used in various fields. Of course, in the process of using the foam cutting machine, it will inevitably lead to failure and need to be repaired. Now we will say the following precautions during maintenance.
We must check the front and back of the foam forming machine. It is necessary to determine whether the equipment can be used normally and whether there is abnormal buzz.
E-mail
Message
Contact
Tel:
English 
