Tel: +86-18868710888 571-81110023
ricky@epsole.com
Home
Product
Video
About us
Contact us
August
When pre-expanding with an intermittent pre-expansion machine, the production efficiency per hour is different according to different foaming ratios.
When the foam mechanical equipment is powered on, it condenses into a liquid, and a certain amount of foaming agent and water vapor remain in the pre-expanded beads. The liquid foaming agent is dissolved in the polystyrene, and the pressure in the bubbles drops immediately, and the beads in the bubbles Soft, easily deformed, negative pressure (partial vacuum) occurs.
Core Tip: The forming machine, also known as the unpacking machine, refers to the automatic completion of unpacking, forming, and folding of the lower bottom leaflet. And now the lower part of the tape is pasted, the box board that is folded into cardboard is opened, the bottom of the box is folded according to a certain procedure, sealed with tape, and then transported to the special equipment of the packing machine.
If you are new to the CNC foam cutting machine, first find the side power switch of the high-voltage generator and the power switch of the industrial computer. To start the interface, click the control interface in the cutting software. At this time, click the oil pump switch to check the rotation direction of the motor and the oil pump. The arrows above indicate whether the direction is the same and then start. Start the oil pump motor and adjust the control valve control pressure to a lower value.
E-mail
Message
Contact
Tel:
English 
